Hydraulic Fittings & Adapters

Manufacturer Since 2011

7/24 service tel:0086-13757372628

info@hydraulicsfitting.com


Rhineland logos

Metric Adapters

Metric Adapters can include one male end and one female end, two male ends, or two female ends. Regardless of the combination of thread types, for example, one end has a standard thread and the other end has a metric thread. You will get the metric hydraulic fittings and designs suggestion from our experts.

JIC To Metric adapters

JIC to Metric fitting, the thread ends are Male JIC To Male Metric or Female JIC Swivel to Male Metric.

JIC to Metric adapters securely connects hydraulic hoses to pipe, tube, because it has different thread types JIC or Metric, or different thread sizes.

Metric Plug Adapter

Metric Plug adapter is externally threaded fitting that fits tightly into a threaded hole to create a seal.

Metric plugs come either with parallel threads or tapered threads. Pipe plugs with parallel threads will have a shoulder and will be used with a seal ring or gasket.

JIC To Metric Dual Purpose

JIC to Metric Dual Purpose, the fitting thread ends are Male JIC To Male Metric Compression.

All of JIC to Metric Dual Purpose meet the SAE, ISO, and DIN standards requirements.

JIC To Metric Swivel

JIC to Metric Swivel, the fitting thread ends are Male JIC To Female metric Compression.

All of JIC to Metric Swivel meet the standards of DIN 2353, SAE J514, DIN 3861 requirements.

Pipe To Metric Adapters

Pipe To Metric adapters, the fitting thread ends are Female pipe to Male Metric.

The external thread metric threaded end can be added with a sealing ring, which can effectively prevent leakage

JIC To Metric Standpipe

JIC To Metric Standpipe, the fitting thread ends are Male JIC to Metric Standpipe.

For JIC threaded ports, we provide thread diameters of various sizes, and we can also make minor modifications according to customer requirements.

JIC To Metric Elbow

JIC To Metric Elbow, the fitting thread ends are Male JIC to Male Metric.

We provide a complete assembly including nuts, washers, and O-rings. The angle of the elbow is 90 degrees or 45 degrees

ORFS To Metric Adapters

ORFS To Metric adapters, the fitting thread ends are Male O-Ring Face Seal to Male Metric.

We provide services on how to properly install the ORFS To Metric Adapter and prevent small leaks or poor system design.

Metric Adapters DIN 2353

Metric Adapter DIN 2353 shown here is for general hydraulic use. Pressure ratings are dependent on thread size and design. Wherever possible, elbows and tees are forged one-piece designs rather than cast from components.